IAD4 Data Center Relocation Managed Customer FAQ

Overview

In November 2017, Rackspace completed its acquisition of Datapipe, which increased the Rackspace data center footprint across the globe. In some regions, including America, this resulted in multiple locations within a geographical area. Rackspace leaders identified which data centers offer the most reliability, high availability, and efficiency while offering our customers access to the full range of Rackspace products and services.

Following a review of our global footprint of data centers, and with the lease for IAD4 coming to an end in 2020, Rackspace decided to reduce our footprint by moving all customers from IAD4 to the IAD3 facility.

This document relates specifically to customers with a managed or shared infrastructure. If you are a colocation customer, request a copy of the IAD4 Colocation Customer FAQ.

When will the relocation take place?

Rackspace assigns all customers on managed infrastructure to a move group, which we will schedule for a date in September or October 2020. We schedule the move groups to run in a maintenance window starting on either a Friday or Saturday night and running through to the following morning. We plan to keep the maintenance window shorter
than 12 hours. We will confirm the exact timings when we allocate the move groups, at least 60 days in advance of the move date.

Will service be interrupted?

Yes. We are performing a physical migration of your environment, so it will be offline while moving to the new location.

How will the migration be carried out?

We will use the physical migration method, which means that after we power down the devices in the source data center, we remove them from the cabinets and physically transport them to the destination data center. Upon arrival, we rack
the devices in their new locations and bring the environment back online. The high-level stages for the move are as follows:

  • You will be allocated a move group at least two months in advance of the date.

  • As your maintenance date nears, Rackspace works with you and your account team to establish any specific requirements for the move.

  • During this period, Rackspace performs non-intrusive audits on your environment to ensure that the information in our system is up-to-date and to get a better understanding of how it might perform when it is shut down and restarted. The results of these audits might require input from you. We will also replicate data on our shared storage platforms to the destination data center.

  • On the night of the migration, shortly before the maintenance window starts, we run a final audit, place all devices under alert suppression, and make any required changes to Rackspace management IP addresses. If you requested that we shut down your devices in a specific order, we do this shortly before the maintenance window officially opens.

  • At the start of the maintenance window, Rackspace runs an automated script to shut down all servers. After all servers are offline, we remove physical devices from the cabinets and shut down dedicated storage and network devices and remove them from the cabinets.

  • We place all devices onto a truck and transport them to the new facility where we rack all devices in new locations that we prepared in advance with the appropriate cabling and power.

  • Your environment undergoes basic connectivity testing, and the team performs any custom testing that we agreed to before the maintenance. You should also be prepared to carry out tests after the move completes. You can request that we contact you after we complete our tests.

Will there be any IP address changes?

In most cases, we don't need to change public IP addresses. If we need to make any changes, we will work with you to minimize the impact of the change.

We might need to change private IP addresses as we transition your devices to the Rackspace Managed Backup service. This product uses a separate network exclusively for backups to avoid degradation of public traffic as it takes backups. Rackspace is responsible for making these changes to devices to which we have access. If you have devices that use managed backup that Rackspace cannot access, we can give you the new IP information so that you can make the necessary changes.

My environment is sensitive to the way it is handled during a shutdown and start-up. Can you help?

Yes. If you tell us the order in which we should shut down and restart devices, we can follow these steps on the night of your move.

Note: If you need us to shut down the devices in a specific order, we might need to start the process before the standard maintenance window begins.

If you prefer to shut down your devices or require us to involve you in the process, let us know in advance of the move.

My data is replicated to another location. How will the migration affect the replication?

It depends on the replication method that you have set up. We recommend that you tell us about any replication or log shipping so that we can work with you to ensure that it is re-established following the move.

I have devices within my managed environment to which Rackspace has no access. How will these be migrated?

Because we usually have no access to your colocation devices, you are responsible for shutting these down. If you take no action, our standard approach is to perform the following steps:

  • Remove the power cables from the colocation devices after all managed devices in the environment are offline.

  • Rack them in the destination data center following the same cabling configuration as in the source data center. Unless you provide other instructions, we cable and rack them in their new locations and power them on.

How will you keep me informed about the migration?

We will create an initial ticket in the customer portal in advance of the moves, which is your official notification. We close this ticket after approximately 25 days and create another ticket 60 days in advance of the move. This ticket includes the date and time of your move. We post all further updates to the 60-day notification ticket. Do not close this ticket until we complete the migration.

What if I need to make changes to my environment between now and the move date?

Approximately one month from your move date, we will perform a non-intrusive audit on your environment and then complete another two weeks later. After we run the second audit, you should make no more configuration changes to the environment, such as adding hardware or expanding drives on shared storage platforms. We will remind you of the change freeze and the items included in that freeze nearer to the time of your maintenance window. You can make changes to your applications and data during the freeze.

I have more than one environment with Rackspace. Will you migrate them at the same time?

We plan to move all devices within an account in the same move group. However, in some cases, we might need to make some configuration changes. In these instances, we will work with you on the best way to move your environments.

How do I prepare for the move?

Rackspace will use all of its experience with data center migration projects to support you before and during the migration. We have assembled a dedicated migration team, made up of some of the best Rackers from across the business.

This team will run audits on your servers before the migration to identify and resolve any potential migration issues in advance. Ensure that you work with the migration team and your account team to resolve any issues promptly.

If you fail to resolve the auditing issues, we might have to perform a manual shutdown in advance of the official maintenance window start time.

The team works with you and your account team to determine and agree to any special requirements that you might have for pre-migration and post-migration instructions as we turn off and turn on your environment. The migration team
will focus on successfully executing your instructions on the night of the migration.

We strongly encourage you to back up your data, either by using the Rackspace Managed Backup service or making your own offsite backups. If your solution is not currently being backed up, you can talk to your account team about putting a backup solution in place before the migration date.

In addition to the backups, consider taking the following steps before the move night:

  • Correct any known disk issues before migration night. Ensure that there are no disk corruption issues by running a check disk (chkdsk). Doing so prevents any forced chkdsk operations when we turn on your server.

  • Fully install any pending Windows® updates before the scheduled migration.

    If updates stop us from being able to turn off your servers gracefully, the downtime for the entire move group could be extended, and we might need to remove the power before the update process concludes.

  • Perform a test reboot of your servers before the migration to ensure that applications and services start correctly. If you want Rackspace to do this, raise a request by using the customer portal.

Will I continue to receive the same services as I currently receive?

Yes. You will continue to receive the same services.

We have a leased line that terminates in IAD4. What will happen to this?

If Rackspace provides the leased line, we take care of this and work with you to schedule the change. If not, you must work with your leased line provider to provision a line into the destination data center. Because lead times for new
leased lines are significant, we advise you to reach out to your provider at your earliest convenience to understand the options. Your account team can provide pertinent information about the new data center that your telecom provider needs.

Whom should I contact with questions about the relocation?

Contact us in one of the following ways:

  • Reach out to your Rackspace account team.

  • Update one of the ticket notifications published in the ticketing system before and during the migration.